Home › Forums › Hardware › cellphones

Ericsson R320s and USB data connector

Fri, 2007-08-10 09:57 — R320s

Hi
I have an Ericsson R320s and USB data connector which I am really interested to link in to Trixbox, along with a power cable to cover a tired battery. I am looking to run up Celliax on a separate pc to test on. Can anyone give me any guidance how to proceed? Will such an interface incorporate the audio, and as such function as a complete connector, as bluetooth seems to be able to manage, or will there also need to be an audio cable made along the lines detailed here and connected into a sound card. The phone side of the USB connector appears to simultaneously connect with both the the data and audio sockets. (At least it has the connectors on the phone side plug!) In advance many thanks!

‹ Siemens Celliax Datacable Motorola C350 and celliax ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
Fri, 2007-08-10 17:49 — gmaruzz

Ciao, I googled for R320s

Ciao, I googled for R320s and I found some specs, then I looked at pinouts.ru and found the connector pins.

You can't use the R320s with the normal datacable you have, because the audio is in the same connector as the data. :-(

But you can modify the datacable, adding wires that goes to the soundcard.

Ask a friend that likes electronics and soldering to help you, show him the audiocable schema you can find in the "Support" section of this website and the R320s connector schema.

You can find the connector schema at:
http://pinouts.ru/CellularPhones-A-N/ericsson_218_318_337_388_pinout.shtml

When you have the audio-and-data cable, you will need to edit celliax.conf and set the serial speed to 9600.

Let us know if you try, and if you need more info.

Giovanni

Fri, 2007-08-10 21:19 — R320s

Hey Giovanni, you are the

Hey Giovanni, you are the man!!! Thanks for that, I can solder, although its a challenge at these sizes!! From your link I think http://pinouts.ru/CellularPhones-P-W/erics_t28_pinout.shtml is the one.
Referring to http://www.celliax.org/howtobuildcelliaxadapter, I'd guess R320s Pin 8 is the audio common, Pin 2 is the mic input and Pin 1 is the speaker input. Does this seem correct? The USB connector I have connects USB Red to 2 (Audio from mobile/RTS), USB Green to 3 (CTS/Mobile Station On REQuest), USB White to 4 (Data to mobile (Rx)), USB Blue to 5 (Data from mobile (Tx)) and USB Black to 10 (DGND) Would that seem correct or should I dump the USB cable and connect up a serial one instead? (now that I have a plug for the phone.)

Fri, 2007-08-10 22:13 — gmaruzz

I tell you what I would

I tell you what I would try:

1) with the original non-modified datacable, try to see if the cellphone answers to the standard at commands (for eg. with minicom, 8-N-1 9600 settings). Try at least AT ATZ ATDT333444555 and such

2) if it do not answer, maybe the cell or the datacable are broken and it is better to stop here

3) if it do answer to the AT commands with minicom, try to use it with celliax (try to have it answer a call, and make a call), using the original non-modified datacable and a computer headset-microphone plugged into the soundcard

4) if *and only if* all the previous works, try to modify the cable, adding the wires for audio.

Pay attention to:

a) the USB cable you have is not a USB cable ;-). It is a USB to serial converter (you can probably see that if you plug the cable in the computer without connecting it to the cellphone, the computer will recognize a new serial port like ttyUSB0. You can see this by executing "dmesg" immediately after plugging the datacable). USB has only 2 signal wires plus 1 ground and 1 power lines. Your cable has probably at the connector all the serial-232 wires needed for a modem

b) in the pinout you rightly pointed me to, the pin 2 seems to be shared between the modem lines and the audio lines (it is not a problem if you use the datacable OR the handsfree headset). Maybe there will need some wizadry to make it works with BOTH the data and the audio in use.

c) I will try to have an handsfree for the cellphone, and see which pin it use, probably just the 1,2 and 8. But maybe also some trick on 6 and 7, to activate the external handsfree and disactivate the internal speaker and microphone inside the phone. The worst thing would be if when the phone activates the handsfree, it disactivates the data...

d) if you do not understand exactly how the handsfree works (point c) you cannot proceed

e) when you understood the point c you can try how to share the pin 2 between modem and audio (probably you can just solder one lead of a ceramic 1uF (one microfarad) to the pin, and the other lead of the capacitor to the wire coming from the soundcard. Do not use electrolytic capacitor, so you do not have to bother with positive-negative leads)

An alternative way, less "industrial grade", but very OK for a prototype and for hacking, would be to use the original and non-modified datacable and just to connect the audio wires coming from the soundcard to the microphone and speaker sockets inside the phone. If you pay enough attention, you will probably be able to open the phone and understand how to pull out the internal microphone and speaker, and to connect the wires coming from the soundcard to the microphone and speaker sockets in the phone.

Pay attention that the wires coming from the "MIC" jack of the soundcard have to be connected to the speaker in the phone, and the wires coming from the "HEADSET" jack in the soundcard have to be connected to the microphone in the cellphone.

You maybe need to put a 32 ohm (thirtytwo ohm) resistor between the speaker terminals in the phone (to give it its load), maybe it will work ok also without.

Don't worry about the bias voltage applied to the internal microphone, the soundcard will block it. If you don't know about the bias voltage, just don't worry about. ;-)

Please, let us (and me, I'm fond of those things) know your experiments, and feel free to ask for any info.

Happy hacking!

Giovanni

Sat, 2007-08-11 00:10 — R320s

I believe you are correct

I believe you are correct the USB cable is more correctly a serial to USB convertor.

I have a ("sealed") aftermarket handsfree cable. On the external handsfree there is 32ohm (speaker) between pins 2 and 8 and 940ohm (microphone) between 1 and 8, and as one would expect there is 970ohm between 1 and 2.

There is a button on the handsfree which is used to answer and hang up calls.

There is also some fancy stuff that goes on as when it is plugged into the phone it automatically configures itself as being in Handsfree mode and vice versa when disconnecting. Do I need to do more checking to satisfy point d?

Incidentally the data cables can be cheaply sourced here, so if broken, it is replaceable. (About the only thing that is though!) The USB phone end clips apart, so it is easy to see / change if desired.

I have not yet done 1-4 as c may be more important?

I prefer to proceed along the "Industrial grade" path, if it helps reduce your typing!?

Again, much obliged to you Giovanni.

Sat, 2007-08-11 00:59 — R320s

I also have an ericsson

I also have an ericsson deskstand which translates the phone connection through to the back of it (Type 402 0048-BV) so the single comprehensive USB plug will plug into the back of the deskstand, so it should support the phone and look the part!

I have just realised this may be relevant as when the phone is plugged into the deskstand it is detected as a "Home" connection, (as opposed to the "normal" connection) in the same way as the handsfree is. Somehow the deskstand must tell the phone what it is, as well as being connected. My original plan was to connect the USB cable to the back of the deskstand.

Looking in the phone menus it has selectable and editable profiles. One can edit Ring Volume, Increasing Ring, Vibrating Alert, Accept Calls (from all or nominated phone numbers - might be useful to limit access to the roaming and authorised phones), All Voice Calls, Light, Calling Cards, Profile Name, Auto Activation and Accessories (Car, Desk and Handsfree options). Seems I may be able to edit a profile (or create a new one) specifc to CellIAX deskstand functionality. (CellIAXDesk) Wow!

The USB plug is big, as if it has some electonics in it too. Plugged into Windows it tries to find new hardware "USB-UART Controller", without the phone attached.

Sat, 2007-08-11 10:04 — gmaruzz

Ciao R320s (do you have a

Ciao R320s (do you have a better name? ;-) )

Both the USB cable and the deskstand contains an USB to serial converter and a voltage level shifter, probably, plus the electronics that made the phone aware of being connected to them (some pullup or pulldown resistors between some phone pin).

I strongly suspect that there is some trickery made by the handsfree to have the phone "sense" that an handsfree is connected (again, some resistor, or maybe just the resistance you measured with the tester).

Try to see if the other pins of the handsfree are connected someway to ground or to some other pin (if you can buy cheaply another handsfree, "use the cutter, Luke").

Another thing to test can be: connect the datacable to the phone and the computer, use minicom to made a call ("ATDTnumber" or "ATDTnumber;" note the semicolon in the second command). Try to speak in the phone.

If this go ok, connect the handsfree wires to the datacable connector, and see if it still work. If this go ok, cut the handsfree before the switch and connect them to the jacks for the soundcard.

BUT!!!! I *very much strongly suspect* that the phone do not allows the audio to go to the handsfree if the datacable is working.

So, you would better try the "non-industrial" way, that is guaranteed to work (as long as you do not breaks the phone in trying it ;-) ).

Maybe you could proceed like this:

1) verify that the AT commands are working!!!! and that you can talk in the phone while a call is made (or received, is the same) via AT commands. ("ATDTnumber" or "ATDTnumber;" note the semicolon in the second command)
2) if this works, try to find a non-destructive way to connect the wires coming from soundcard to the mic and spk of the phone (scotch-tape, adhesive tape, 4 friends each one maintaining a wire into position, whatever ;-) )
3) maybe you will have to simulate the load of the speaker and the microphone to have it work, but I don't think so
4) if this works, solder them

If you use (and you would not like to have to solder the soundcard jacks too, better to have them presoldered in the factory) a ready made cable for the soundcard (I mean, a PC headset with the headset cutted away, or a extension-conversion cable you buy ready made and then you cut in half), pay attention that the internal wires are covered by an insulating enamel coating.
So, it will not work to try to use them on the spot (they are insulated). You have to burn the insulating coating away with having the end of the wire "roasting" into a bubble of melted soldering metal for some second. Then verify with a tester that you have continuity between the end of the wire and the part of the jack it is supposed to be connected, and that there is no short circuit with the other parts.

As for the deskstand: If it has an audio path that is working along the data (a speakerphone, an audio jack, etc), BINGO! But it seems that not. So it is of no use to us :-(.

Often the difference between "headset" and "car" is that in "car" the phone is charged by the carkit (and maybe some audio tuning for resilience to the noise and larsen of speakerphone in the car). The "desk" is probably like "data", but it gets charged. But those are just suppositions.

Please don't think of bothering by asking questions and discussing problems in the forums. This is exactly the purpose of the forums and the pleasure of the forums participants ;-)

Let us know!!!

Giovanni

Sat, 2007-08-11 10:30 — R320s

Hi Giovanni, I am also known

Hi Giovanni, I am also known as Dave!

The deskstand reproduces the phone socket faithfully, in same form as the phone socket, hence the translation. Obviously the phone can discriminate what is connected. Also perhaps a small point the desktop stand has the pin 9 out, however the deskstand phone connection is missing the contact for this pin.(!) I am not sure if the flash connection is relevant for our purposes. The USB cable does however have this contact in place, but not connected, it could be if required.

I suspect the data must continue to work on the handsfree, because the button is used to hang up calls, if voice took over and cancelled data the user would not be able to hang up? Pin7 and Pin8 seem have no resistance, whereas the same pins on the deskstand are open.

I tested the deskstand with the handsfree plugged into the back. Initially it did not ring, it remained on the "Home" (deskstand) profile. I then changed the profile to handsfree (from the phones menu) and incoming calls reverted to the handsfree, and the button worked to accept the call. That is the handsfree mic and speaker worked as did the button. Seems important to have the right profile settings!

I have run up your CellIAX CD, looks nice, all be it a little slow using a Pentium 500 III! (1G RAM might help a little though?!)

I have connected up the USB drive and run dmesg, some extracts "USB Serial Support registered for ark3116" "ark3116 converter now attached to ttyUSB0" etc.

I tried using minicom on your CD however I cannot figure how to make a call. I found going Ctrl-A Z got me to the config, I configured the serial device to the above and set the bps etc to 9600 8N1. I configured the phone number in the Dialling Directory and tried to dial, it showed dialling, but no response from the phone. It notes attempts and counts down, but nothing else happens.

Interestingly the phone does not detect the deskstand until it has the power connected. I took the stand apart and it has quite a bit of circuit board, including two larger chips
1102-2C P3C
9CT
A785
and
ST62T28C6
M990B9940 (or M99089940?)
The stand has 3 LEDs on it for power etc, as well as a spare battery charging compartment, I imagine most of the circuitry is to run these.

How to get into the phone is not at all obvious, it will almost certainly never be the same(!) as there are no obvious screws anywhere, there must be some way to unclip the parts... I prefer to not kill it yet.

Please note I have edited messages a few times, so they may change before you reply...or do you prefer lots of small messages?

Sat, 2007-08-11 12:27 — gmaruzz

You write: "I suspect the

Ciao Dave!

You wrote:
"I suspect the data must continue to work on the handsfree, because the button is used to hang up calls, if voice took over and cancelled data the user would not be able to hang up?"

I do not think so, but I'm not sure. I think that the pin 2 can't be used at the same time to carry the voice signal voltage *AND* the Ready To Send signal voltage to the modem. It is probable that the "headset" and "datacable" mode of operation are mutually exclusive.
Normally the button has nothing to do with data... it do not transmit or receive data, it just make a quick short circuit, or breaks the continuity, or add a resistance, that is interpreted as "go hangup" command by the phone.

You have to test the phone answering AT commands, and the only option is to start with minicom or similar programs ;-)

So, from the linux command line become root ("su root" or "sudo su root"), then execute "minicom -s". On the menu, setup the serial port parameters (device /dev/ttyUSB0, speed 9600, 8 N 1). Then save it as dfl (so you do not have to repeat this procedure).
You can do the same with Hyperterminal in windows, I can't remember how.

Then you connect minicom or hyperterminal to the phone. (with minicom, you just re-execute it, after having previously saved the configuration as dfl. please be aware that if you use the livecd, after reboot you will have to reconfigure again the dfl, because all you made is cancelled at reboot, and you always start with a "pristine" livecd)

You then issue commands from the keyboards, and the phone is supposed to answer and act on them.

You type:
AT (and the phone is supposed to answer: "OK" without the quotation marks)
ATZ ("OK")
ATDT334455 (and the phone will call 334455)
ATDT334455; (alternative command with semicolon at end)

forget the dialing directory, it has nothing to do with us.

If you are unable to send AT commands to the phone with minicom or with hyperterminal, something is completely wrong.

If you do not feel too much at ease (or inclined to invest some amount of time to become a little bit at ease) with linux, AT commands, debugging, etc etc, maybe the least pain move is to find a second hand motorola c350 or c650 etc (probabably around 20-30USD on ebay) ;-)

If you need more info on how to use minicom, please ask

Giovanni

Sat, 2007-08-11 12:59 — gmaruzz

stop the presses! I took a

stop the presses!

I took a look at the supposed datacable schema:
http://pinouts.ru/CellularPhonesCables/ericsson_cable_pinout.shtml

It seems that it left completely untouched the pins 1, 2 and 8.

So you can have the datacable and the headset working together, probably! At least seems that the RTS pin is not used (is looped back to CTS - Clear to Send - at the cable internal electronic level)

You just have to understand how to make the phone "aware" that it has to send audio to the headset pins. And hope that doing so do not "disable" the data, or the data disable the headset...

Sat, 2007-08-11 20:15 — R320s

Giovanni That is such a cool

Giovanni
That is such a cool site, it even has http://pinouts.ru/CellularPhones-A-N/ericsson_handsfree_pinout.shtml
which confirms my findings and more!

OK I got minicom to work, does the AT and dials a call from minicom. Well I thought it was, seems it now dials a number and the phone connects and starts timing the call as if the callee had answered, however the phone at the other end did not ring, and it reports "No Carrier". Perhaps that is to be expected at this level?

That bit of progress was encouraging!

Running Celliax: (I edit the file celliax.conf, changing device speed to 9600 and to ttyUSB0, that was all that seemed relevant?)

First off I got some sound card errors and it wouldn't finish starting, telling me to quit.

I changed the sound card from an old Creative 16 ISA to an Ensoniq PCI and there seemed to be no objection, instead it moved on to complain about chan_celliax.c:4627 serial write AT expect error sending data....with about 8 more error messages ending in Loading chan_celliax.so failed. Not sure how I capture this text to reproduce? How do I proceed from here?

Sun, 2007-08-12 01:59 — gmaruzz

Ciao Dave, try first to have

Ciao Dave,

try first to have a working phone call via minicom.

It seems that it try to make a data call. Because the remote is not a modem, it hangs with no carrier.

Have you tried the "ATDTnumber;" with the semicolon at the end?

Also, after sending the command "ATDT333444" or "ATDT333444;" you do not have to send nothing else, just waiting. If you send other commands it will hangup.

There can be many many different way to initiate a voice call, unfortunately. And maybe your model ask for a proprietary command.

If this do not works, try to find the manual for at commands for your model or series.

You have first to identify with minicom the at commands that are needed to make a working voice call.

Try googling for "at commands" ericsson or something similar, or check the developer part of the sony-ericsson site.

It seems to me that maybe I have something, I'll check monday...

Don't try to use asterisk right now, at this stage minicom is the right tool.

To capture the text, just select it from minicom or from the terminal and paste somewhere else.

Sun, 2007-08-12 02:15 — R320s

Hello Again Giovanni, I

Hello Again Giovanni,

I think minicom is fixed now, it was a new SIM card and it needed some setup PIN, but they were slow to offer it.... Seems to work with fine with the ";". Without the semicolon the receiver rings and gets fax tones on answering. The caller display seems to need to be clear of digits also.

I believe the AT command reference for my phone is http://linuxbrit.co.uk/downloads/R320AT_R1A.pdf
It seems this was the first phone in their series to have IR functionality, apparently the commands are the same by cable and IR, which would make sense.

There seems to be no text capture command available in that window that I can find? There are no menus with a copy find nor does Ctrl+C or Shift+Ins work. What is the trick?

CellIAX runs in NO_SERIAL mode. If I shout into the microphone I get an introductory voice message that is too loud and distorted. Nothing seems to happen to the phone. Otherwise it is as noted above.

Sun, 2007-08-12 13:45 — gmaruzz

In linux, you just highlight

In linux, you just highlight with the right mouse button the part you want to copy (no need for ctrl-c), then you use the middle mouse button to paste it where you want (no need for ctrl-v). If you have a two-button mouse, the middle mouse button is emulated by pressing the left and right buttons at the same moment.

If celliax run in NO_SERIAL mode, it do not use the serial port ;-)

You have to edit the celliax.conf file and change "no_serial" to "at", so it will use the serial connection sending and receiving AT commands.

The celliax.conf file is in /usr/local/asterisk/etc/asterisk/celliax.conf in the livecd and in /etc/asterisk/celliax.conf in trixbox

Mon, 2007-08-13 15:07 — gmaruzz

Giovanni, Here is

Giovanni, Here is celliax's
Submitted by R320s on Sun, 2007-08-12 20:36.

Giovanni,

Here is celliax's output when celliax.conf has been edited to 9600, AT, ttyUSB0

Asterisk {...deleted}
=========================================================================
[ Booting...Aug 12 19:16:18 NOTICE[3795]: cdr.c:1193 do_reload: CDR simple loggi
ng enabled.
...............Aug 12 19:16:18 NOTICE[3795]: chan_celliax.c:2052 mkif: [b7bee6c0
][NOTICE 2052 ][nicephone ][-1, 0, 0, 0] at_dial_post_number=|S"|
Aug 12 19:16:20 ERROR[3795]: chan_celliax.c:4627 serial_write_AT_expect: [b7bee6
c0][ERROR 4627 ][nicephone ][-1, 0, 0, 0] Error sending data... (Resource
temporarily unavailable)
Aug 12 19:16:20 WARNING[3795]: chan_celliax.c:4686 serial_config_AT: [b7bee6c0][
WARNING 4686 ][nicephone ][-1, 0, 0, 0] atciapa does not get OK from the phon
e. Continuing.
Aug 12 19:16:21 ERROR[3795]: chan_celliax.c:4603 serial_write_AT_ack: [b7bee6c0]
[ERROR 4603 ][nicephone ][-1, 0, 0, 0] Error sending data... (Resource te
mporarily unavailable)
Aug 12 19:16:21 ERROR[3795]: chan_celliax.c:4744 serial_config_AT: [b7bee6c0][ER
ROR 4744 ][nicephone ][-1, 0, 0, 0] no response to AT
Aug 12 19:16:21 ERROR[3795]: chan_celliax.c:2263 mkif: [b7bee6c0][ERROR 2
263 ][nicephone ][-1, 0, 0, 0] serial_config failed
Aug 12 19:16:21 ERROR[3795]: chan_celliax.c:1712 load_module: [b7bee6c0][ERROR
1712 ][none ][-1,-1,-1,-1] Unable to create channel Celliax from cell
iax.conf category '[nicephone]'
Aug 12 19:16:21 WARNING[3795]: loader.c:414 __load_resource: chan_celliax.so: lo
ad_module failed, returning -1
Aug 12 19:16:21 NOTICE[3795]: chan_celliax.c:1847 unload_module: [b7bee6c0][NOTI
CE 1847 ][none ][-1,-1,-1,-1] Unloaded Celliax Module
Aug 12 19:16:21 WARNING[3795]: loader.c:554 load_modules: Loading module chan_ce
lliax.so failed!

press q to quit

I am not sure what to do now? Can you advise me?

=====================================

we're going fast!!!
Submitted by gmaruzz on Sun, 2007-08-12 22:13.

we're going fast!!! good!

edit logger.conf to enable debugging in console
edit celliax.conf to enable debug_at

start asterisk as: asterisk -cdddddddddddd (c followed by many d)

The problem is that celliax do not successfully interact with the serial port (/dev/ttyUSB0 in this case).

Do you have minicom working at the same time? If so, you better close minicom.

Please, post the debugging results

Also, please post the part of celliax.conf with the ttyUSB0 and 9600 in it
delete | edit | reply
I see that you are using the
Submitted by gmaruzz on Sun, 2007-08-12 22:42.

I see that you are using the livecd.

Unfortunately the livecd will probably not work with your phone.... (the way to interact with the serial port has changed since the livecd was out, now is better with slow phones).

If you have more than 256MB of ram on the computer that is running the livecd, you can do this:

1) open a terminal
2) type "sudo su"
3) type "svn checkout http://www.celliax.org:8081/svn/celliax/trunk celliax"
4) type "cd celliax/asterisk-1.2.XX"
5) type "make install"
6) DON'T TYPE "make samples"
7) proceed as per the previous posting (edit logger.conf and celliax.conf, etc)

REMEMBER: each time you reboot, you have to start from point 1 (so, don't reboot ;-) )

===============================

Yes I was going to ask how
Submitted by R320s on Sun, 2007-08-12 23:04.

Yes I was going to ask how to transfer to a HDD or CF card? (I can run either here) PC now has 2G RAM. I have changed to a faster AMD 2400 as Intel 500!!! is too slow for testing etc, although should be fine for final machine...

What directory is the asterisk command run from?

Perhaps it might be easiest to install a test version of Trixbox (2.2.4) on a HDD , download Celliax and continue work on that platform, presumably using your immediately previous upgrade instructions?

Not sure the distinction you make in slow phones vs faster phones?! 3G? Data transfer rates? The CD I am using is the latest 0.46.

From your responses Giovanni, it seems you are enthusiastic to keep working on this, I hope its not a bother to you, certainly it will give others a trail to work through and I feel confident we will succeed as you give good timely responses!

Once we have it working I plan to run celliax as a second Trixbox and trunk into the main one. Once it seems stable I will look to integrate.

===================================

the livecd is just a demo,
Submitted by gmaruzz on Mon, 2007-08-13 02:57.

the livecd is just a demo, it is not supposed to be installed on hard disk

the command is /usr/local/asterisk/usr/sbin/asterisk -cddddddd

if you follow the trixbox how-to (in home page) you will end up with the latest sources.

I was talking about phones that connect to the serial port at a slow speed (9600 in your case)

I'm trying to help you and the community, but it is the most difficult thing to make a new phone model to work, especially one that has not separate audio and data connectors

and yes, I like those things ;-)

happy hacking!

===========================================

Hello Giovanni Running
Submitted by R320s on Mon, 2007-08-13 10:22.

Hello Giovanni
Running through the Trixbox install (from 2.2.4 iso) I get the following excerpts:

[root@asterisk1 ~]# ldconfig
[root@asterisk1 ~]# amportal stop
-bash: amportal: command not found
You have mail in /var/spool/mail/root
[root@asterisk1 ~]#
[root@asterisk1 ~]#
[root@asterisk1 ~]# mkdir alsarpm
[root@asterisk1 ~]# cd alsarpm/
[root@asterisk1 alsarpm]# wget -c
.....

The mail is:

From root@asterisk1.local Mon Aug 13 20:22:20 2007
Return-Path:
Received: from asterisk1.local (localhost [127.0.0.1])
by asterisk1.local (8.13.1/8.13.1) with ESMTP id l7D8MKeA006061
for ; Mon, 13 Aug 2007 20:22:20 +1200
Received: (from root@localhost)
by asterisk1.local (8.13.1/8.13.1/Submit) id l7D8MJ1n006054
for root; Mon, 13 Aug 2007 20:22:19 +1200
Date: Mon, 13 Aug 2007 20:22:19 +1200
Message-Id: <200708130822.l7D8MJ1n006054@asterisk1.local>
From: root@asterisk1.local (Anacron)
To: root@asterisk1.local
Content-Type: text/plain; charset="ANSI_X3.4-1968"
Subject: Anacron job 'cron.daily'

/etc/cron.daily/asterisk_cleanup:

/usr/bin/find: /var/lib/asterisk/sounds/tts: No such file or directory
/etc/cron.daily/logrotate:

error: error accessing /var/log/asterisk: No such file or directory
error: asterisk:1 glob failed for /var/log/asterisk/*log

and later...

[root@asterisk1 asterisk-1.2.XX]# cp ../celliax_stuff/newconfigs/celliax.conf /etc/asterisk/
[root@asterisk1 asterisk-1.2.XX]# nano /usr/sbin/amportal
[root@asterisk1 asterisk-1.2.XX]# cd /usr/sbin/amportal
-bash: cd: /usr/sbin/amportal: No such file or directory
[root@asterisk1 asterisk-1.2.XX]# cd /usr/sbin/
[root@asterisk1 sbin]# ls

As /usr/sbin/amportal is not there I have to assume something has gone wrong. I'll stop here and await your advice.

I also presume your instructions intend to not "make install" following the "make", would it be helpful to edit your instructions to make it clear not to "make install" (or otherwise) I didn't. I hope this is correct however it cause me to reflect...

Looking forward to your advice!

By the way I am hopeful to have the power, data and sound all connect through the same plug to the phone, should I come to do the reconfig of the cable! Of course for this phone model it seems the only possible way to do it!

===============================

Ciao Dave, the instructions
Submitted by gmaruzz on Mon, 2007-08-13 11:35.

Ciao Dave,

the instructions are for Trixbox 2.2.3 (I added your useful comments to the instructions). 2.2.4 is out since august 8 ;-). From what you say, seems that they have changed the file structure. If you use 2.2.4 you have to adapt the instructions.
I would counseil you to use 2.2.3 for now.

===================================

Hi Giovanni I also have 2.0,
Submitted by R320s on Mon, 2007-08-13 11:54.

Hi Giovanni

I also have 2.0, 2.2 and 2.2.3-1 here, happy to run one of them up, however won't the initial update bring it back up to 2.2.4?

Quote: [root@asterisk1 ~]# yum -y update
This command will update the entire Operating System and Trixbox installation?

I recall my main trixbox update has gone upto 2.2.3 without using the 2.2.3 iso.

I suppose I could skip the # yum -y update step.

==========================================

I don't think it will bring
Submitted by gmaruzz on Mon, 2007-08-13 14:42.

I don't think it will bring trixbox to 2.2.4, but maybe it do.

So, to be on the safe side, you can skip that step.

Tue, 2007-08-14 05:22 — R320s

Hi Giovanni 2.2.3-1 installs

Hi Giovanni

2.2.3-1 installs fine as per the instructions. (It made me wonder if it would be worth updating the instructions to 2.2.4 as I understand this is the last version of the 2.2.x series, but I am sure that needs to be for another day, however I am not sure if other people can now source 2.2.3-1, it was just lucky I had downloaded it!)

control_device_name=/dev/ttyUSB0 was already correctly specified, perhaps some smarts picked this up?

Here is the data requested.

Looking forward to hearing from you!

Dave

celiax.conf section:

;debug_all=yes
debug_at=yes
;debug_fbus2=yes
;debug_serial=yes
;debug_pbx=yes
;debug_sound=yes
;debug_locks=yes
;debug_skype=yes
;debug_call=yes
;debug_cvm=yes

; skype is not yet supported, but will come back in the future
skype=no

;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;
; serial settings, valid for all platforms
;
;control_device_protocol can be AT or FBUS2 or NO_SERIAL (with NO_SERIAL the speed and name of the port are ignored)
control_device_protocol=at

;speed of the serial port
;control_device_speed=38400
;ericsson R320s etc
control_device_speed=9600

;name of the serial port device
;control_device_name=/dev/ttyACM0 ; this is a Motorola phone, recognized as a modem by Linux
;control_device_name=/dev/ttyS9 ; this is the COM10 on windows
control_device_name=/dev/ttyUSB0 ; this is the first USB serial port in Linux

;cvm_subscription_1_pin = 0000 ; CVM hold registration info about two FP (DECT base stations)
;cvm_subscription_2_pin = 1234 ; these are PINs for each FP, used only during registartion process

[root@asterisk1 ~]# asterisk -cdddddddddddd
Parsing /etc/asterisk/asterisk.conf
Parsing /etc/asterisk/extconfig.conf
Asterisk 1.2.20, Copyright (C) 1999 - 2007 Digium, Inc. and others.

Created by Mark Spencer

Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details.

This is free software, with components licensed under the GNU General Public

License version 2 and other licenses; you are welcome to redistribute it under

certain conditions. Type 'show license' for details.

=========================================================================

[ Booting...Parsing /etc/asterisk/logger.conf
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/dnsmgr.conf
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/modules.conf
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/manager.conf
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/manager_custom.conf
Aug 14 16:43:38 NOTICE[3592]: cdr.c:1214 do_reload: CDR simple logging enabled.
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/rtp.conf
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/enum.conf
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/modules.conf
Aug 14 16:43:38 DEBUG[3592]: loader.c:494 load_modules: Loading module format_wav.so
.Aug 14 16:43:38 DEBUG[3592]: loader.c:494 load_modules: Loading module format_pcm.so
.Aug 14 16:43:38 DEBUG[3592]: loader.c:494 load_modules: Loading module format_au.so
.Aug 14 16:43:38 DEBUG[3592]: loader.c:494 load_modules: Loading module format_mp3.so
.Aug 14 16:43:38 DEBUG[3592]: loader.c:494 load_modules: Loading module res_musiconhold.so
.Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/musiconhold.conf
Aug 14 16:43:38 WARNING[3592]: res_musiconhold.c:1290 load_module: No music on hold classes configured, disabling music on hold.
Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module res_odbc.so
.Aug 14 16:43:38 NOTICE[3592]: res_odbc.c:593 load_module: res_odbc loaded.
Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module res_monitor.so
.Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module res_config_mysql.so
.Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/res_mysql.conf
Aug 14 16:43:38 WARNING[3592]: res_config_mysql.c:570 parse_config: MySQL RealTime: No database port found, using 3306 as default.
Aug 14 16:43:38 WARNING[3592]: res_config_mysql.c:577 parse_config: MySQL RealTime: No database socket found, using '/tmp/mysql.sock' as default.
Aug 14 16:43:38 DEBUG[3592]: res_config_mysql.c:586 parse_config: MySQL RealTime Host: 127.0.0.1
Aug 14 16:43:38 DEBUG[3592]: res_config_mysql.c:587 parse_config: MySQL RealTime Port: 3306
Aug 14 16:43:38 DEBUG[3592]: res_config_mysql.c:591 parse_config: MySQL RealTime User: asteriskuser
Aug 14 16:43:38 DEBUG[3592]: res_config_mysql.c:592 parse_config: MySQL RealTime Password: amp109
Aug 14 16:43:38 DEBUG[3592]: res_config_mysql.c:645 mysql_reconnect: MySQL RealTime: Successfully connected to database.
Aug 14 16:43:38 NOTICE[3592]: config.c:868 ast_config_engine_register: Registered Config Engine mysql
Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module res_indications.so
.Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/indications.conf
Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module res_config_odbc.so
.Aug 14 16:43:38 NOTICE[3592]: config.c:868 ast_config_engine_register: Registered Config Engine odbc
Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module res_features.so
.Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/features.conf
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'parkedcalls'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '700' priority 1 to parkedcalls
Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module res_speech.so
.Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module res_adsi.so
.Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module res_crypto.so
.Aug 14 16:43:38 DEBUG[3592]: res_crypto.c:257 try_load_key: Key 'iaxtel' loaded OK
Aug 14 16:43:38 DEBUG[3592]: res_crypto.c:257 try_load_key: Key 'freeworlddialup' loaded OK
Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module res_agi.so
.Aug 14 16:43:38 DEBUG[3592]: loader.c:549 load_modules: Loading module pbx_config.so
.Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/extensions.conf
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/extensions_additional.conf
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/extensions_custom.conf
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/extensions_trixbox.conf
Aug 14 16:43:38 DEBUG[3592]: config.c:597 config_text_file_load: Parsing /etc/asterisk/extensions_hud.conf
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'app-userlogonoff'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '*12' priority 1 to app-userlogonoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '*12' priority 2 to app-userlogonoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension '*11' priority 1 to app-userlogonoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '*11' priority 2 to app-userlogonoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_*11.' priority 1 to app-userlogonoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*11.' priority 2 to app-userlogonoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'app-pickup'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_**.' priority 1 to app-pickup
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_**.' priority 2 to app-pickup
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'app-zapbarge'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '888' priority 1 to app-zapbarge
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '888' priority 2 to app-zapbarge
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '888' priority 3 to app-zapbarge
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '888' priority 4 to app-zapbarge
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '888' priority 5 to app-zapbarge
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '888' priority 6 to app-zapbarge
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'app-chanspy'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '555' priority 1 to app-chanspy
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '555' priority 2 to app-chanspy
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '555' priority 3 to app-chanspy
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '555' priority 4 to app-chanspy
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '555' priority 5 to app-chanspy
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'ext-test'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '7777' priority 1 to ext-test
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension '666' priority 1 to ext-test
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 'h' priority 1 to ext-test
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'ext-did'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 'fax' priority 1 to ext-did
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'ext-did-catchall'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to ext-did-catchall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to ext-did-catchall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to ext-did-catchall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to ext-did-catchall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to ext-did-catchall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_[*#X].' priority 1 to ext-did-catchall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_[*#X].' priority 2 to ext-did-catchall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_[*#X].' priority 3 to ext-did-catchall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'outbound-allroutes'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 'foo' priority 1 to outbound-allroutes
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'outrt-001-9_outside'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_9.' priority 1 to outrt-001-9_outside
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_9.' priority 2 to outrt-001-9_outside
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'app-blackhole'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 'hangup' priority 1 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'hangup' priority 2 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 'zapateller' priority 1 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'zapateller' priority 2 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'zapateller' priority 3 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'musiconhold' priority 1 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'musiconhold' priority 2 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'musiconhold' priority 3 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'congestion' priority 1 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'congestion' priority 2 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'congestion' priority 3 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'congestion' priority 4 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'congestion' priority 5 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'busy' priority 1 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'busy' priority 2 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'busy' priority 3 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'busy' priority 4 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'busy' priority 5 to app-blackhole
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'from-internal-additional'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 'h' priority 1 to from-internal-additional
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'from-internal-trixbox'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '*61' priority 1 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '*61' priority 2 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '*61' priority 3 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '*62' priority 1 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '*62' priority 2 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '*62' priority 3 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '611' priority 1 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '611' priority 2 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '611' priority 3 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '611' priority 4 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '611' priority 5 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '611' priority 6 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '611' priority 7 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '611' priority 8 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '611' priority 9 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '611' priority 10 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '611' priority 11 to from-internal-trixbox
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'custom-meetme'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to custom-meetme
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'h' priority 1 to custom-meetme
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'custom-wakeupext'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to custom-wakeupext
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to custom-wakeupext
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to custom-wakeupext
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'custom-fastagi'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to custom-fastagi
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'xfer-to-hold'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_X.' priority 1 to xfer-to-hold
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'xfer-to-vm'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_*86[1-8]XXXX' priority 1 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*86[1-8]XXXX' priority 2 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*86[1-8]XXXX' priority 3 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*86[1-8]XXXX' priority 4 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension '_*86[1-8]XXX' priority 1 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*86[1-8]XXX' priority 2 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*86[1-8]XXX' priority 3 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*86[1-8]XXX' priority 4 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension '_*86[1-8]XX' priority 1 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*86[1-8]XX' priority 2 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*86[1-8]XX' priority 3 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*86[1-8]XX' priority 4 to xfer-to-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'barge'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_1X.' priority 1 to barge
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_2X.' priority 1 to barge
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'xfer-to-park'
Aug 14 16:43:38 WARNING[3592]: pbx_config.c:1754 pbx_load_module: The use of '_.' for an extension is strongly discouraged and can have unexpected behavior. Please use '_X.' instead at line 35
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_.' priority 1 to xfer-to-park
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'from-internal-custom'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'from-trunk'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'from-pstn'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 'fax' priority 1 to from-pstn
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'from-did-direct'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-dial'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 20 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 21 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 22 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 23 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 30 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 31 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 32 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 33 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 34 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 35 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 36 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 37 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 38 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 39 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 40 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 41 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 42 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 43 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 44 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 45 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 46 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 47 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 50 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 51 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'h' priority 1 to macro-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-exten-vm'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 12 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 13 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 14 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 15 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 16 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 17 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'docfu' priority 1 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfu' priority 2 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfu' priority 3 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'docfb' priority 1 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfb' priority 2 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfb' priority 3 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's-BUSY' priority 1 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-BUSY' priority 2 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-BUSY' priority 3 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_s-.' priority 1 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_s-.' priority 2 to macro-exten-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-vm'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's-BUSY' priority 1 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-BUSY' priority 2 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-BUSY' priority 3 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-BUSY' priority 4 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's-DIRECTDIAL' priority 1 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-DIRECTDIAL' priority 2 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-DIRECTDIAL' priority 3 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-DIRECTDIAL' priority 4 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_s-.' priority 1 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_s-.' priority 2 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_s-.' priority 3 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'o' priority 1 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'o' priority 2 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'o' priority 3 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'o' priority 4 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'o' priority 5 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'o' priority 6 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'o' priority 7 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'a' priority 1 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'a' priority 2 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'a' priority 3 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'exit-FAILED' priority 1 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'exit-FAILED' priority 2 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'exit-SUCCESS' priority 1 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'exit-SUCCESS' priority 2 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'exit-USEREXIT' priority 1 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'exit-USEREXIT' priority 2 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 't' priority 1 to macro-vm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-simple-dial'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 12 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'docfu' priority 1 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfu' priority 2 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfu' priority 3 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfu' priority 4 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfu' priority 5 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'docfb' priority 1 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfb' priority 2 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfb' priority 3 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfb' priority 4 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docfb' priority 5 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_s-.' priority 1 to macro-simple-dial
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-get-vmcontext'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-get-vmcontext
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-get-vmcontext
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 200 to macro-get-vmcontext
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 300 to macro-get-vmcontext
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-fixcid'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-fixcid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-rg-group'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-rg-group
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-rg-group
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-rg-group
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-rg-group
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-rg-group
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-rg-group
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-rg-group
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-rg-group
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-rg-group
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-rg-group
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-outisbusy'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-outisbusy
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-outisbusy
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-outisbusy
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-hangupcall'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-hangupcall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-hangupcall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-hangupcall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-hangupcall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-hangupcall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-hangupcall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-hangupcall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-hangupcall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-hangupcall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-hangupcall
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-faxreceive'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-faxreceive
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-faxreceive
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-faxreceive
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 103 to macro-faxreceive
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 104 to macro-faxreceive
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-dialout'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 109 to macro-dialout
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-dialout-default'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-dialout-default
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-dialout-default
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-dialout-default
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-dialout-default
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-dialout-default
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-dialout-default
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 105 to macro-dialout-default
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-dialout-trunk'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 12 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 13 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 14 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 15 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 16 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 17 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 18 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 19 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 20 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 21 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 22 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 23 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 24 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 25 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 26 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 27 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 28 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 29 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's-BUSY' priority 1 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-BUSY' priority 2 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's-NOANSWER' priority 1 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-NOANSWER' priority 2 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-NOANSWER' priority 3 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 's-CANCEL' priority 1 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-CANCEL' priority 2 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-CANCEL' priority 3 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_s-.' priority 1 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'h' priority 1 to macro-dialout-trunk
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-agent-add'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 12 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 13 to macro-agent-add
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-agent-del'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to macro-agent-del
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-dialout-enum'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 12 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 13 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 14 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 15 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 16 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 17 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 18 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 19 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 20 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 21 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 22 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 23 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 24 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 25 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 26 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 27 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 28 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 29 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 30 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 31 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 32 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 33 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 34 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 35 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 36 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 37 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 38 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 39 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 40 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 41 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 42 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 43 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 44 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 45 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 46 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 47 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 48 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 49 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 50 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 51 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 52 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's-BUSY' priority 1 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-BUSY' priority 2 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_s-.' priority 1 to macro-dialout-enum
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-record-enable'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-record-enable
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-record-enable
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-record-enable
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-record-enable
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-record-enable
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 999 to macro-record-enable
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-dumpvars'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 12 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 13 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 14 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 15 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 16 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 17 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 18 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 19 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 20 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 21 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 22 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 23 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 24 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 25 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 26 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 27 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 29 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 30 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 31 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 32 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 33 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 34 to macro-dumpvars
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-user-logon'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 12 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 13 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 14 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 15 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 16 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 17 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 18 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 19 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 20 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 21 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's-FIXED' priority 1 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-FIXED' priority 2 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-FIXED' priority 3 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-FIXED' priority 4 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-FIXED' priority 5 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-FIXED' priority 6 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 's-ALREADYLOGGEDON' priority 1 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-ALREADYLOGGEDON' priority 2 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-ALREADYLOGGEDON' priority 3 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's-NOPASSWORD' priority 1 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-NOPASSWORD' priority 2 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-NOPASSWORD' priority 3 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-NOPASSWORD' priority 4 to macro-user-logon
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-user-logoff'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's-FIXED' priority 1 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-FIXED' priority 2 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-FIXED' priority 3 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's-FIXED' priority 4 to macro-user-logoff
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-systemrecording'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'dorecord' priority 1 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'dorecord' priority 2 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'dorecord' priority 3 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'docheck' priority 1 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docheck' priority 2 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'docheck' priority 3 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'confmenu' priority 1 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'confmenu' priority 2 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'confmenu' priority 3 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'confmenu' priority 4 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'confmenu' priority 5 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension '1' priority 1 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension '*' priority 1 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 't' priority 1 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 't' priority 2 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'i' priority 1 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 'i' priority 2 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'h' priority 1 to macro-systemrecording
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-user-callerid'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 12 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 13 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 14 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 15 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 16 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 17 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 18 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 19 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 20 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 21 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'h' priority 1 to macro-user-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-outbound-callerid'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 12 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 13 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 14 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 15 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 16 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 17 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 18 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 19 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 20 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 21 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 22 to macro-outbound-callerid
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-privacy-mgr'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 109 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 110 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 111 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 112 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 113 to macro-privacy-mgr
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'from-sip-external'
Aug 14 16:43:38 WARNING[3592]: pbx_config.c:1754 pbx_load_module: The use of '_.' for an extension is strongly discouraged and can have unexpected behavior. Please use '_X.' instead at line 806
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_.' priority 1 to from-sip-external
Aug 14 16:43:38 WARNING[3592]: pbx_config.c:1754 pbx_load_module: The use of '_.' for an extension is strongly discouraged and can have unexpected behavior. Please use '_X.' instead at line 807
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_.' priority 2 to from-sip-external
Aug 14 16:43:38 WARNING[3592]: pbx_config.c:1754 pbx_load_module: The use of '_.' for an extension is strongly discouraged and can have unexpected behavior. Please use '_X.' instead at line 808
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_.' priority 3 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 's' priority 1 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'h' priority 1 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'i' priority 1 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 't' priority 1 to from-sip-external
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'from-internal'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to from-internal
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'h' priority 1 to from-internal
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'bad-number'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_X.' priority 1 to bad-number
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_X.' priority 2 to bad-number
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_X.' priority 3 to bad-number
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_X.' priority 4 to bad-number
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_X.' priority 5 to bad-number
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension '_*.' priority 1 to bad-number
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*.' priority 2 to bad-number
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*.' priority 3 to bad-number
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*.' priority 4 to bad-number
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_*.' priority 5 to bad-number
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'from-zaptel'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension '_X.' priority 1 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension '_X.' priority 2 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 's' priority 1 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 9 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 10 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 11 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 12 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 13 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4883 ast_add_extension2: Added extension 'fax' priority 1 to from-zaptel
Aug 14 16:43:38 DEBUG[3592]: pbx.c:3696 ast_context_create: Registered context 'macro-dial-confirm'
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4898 ast_add_extension2: Added extension 's' priority 1 to macro-dial-confirm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 2 to macro-dial-confirm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 3 to macro-dial-confirm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 4 to macro-dial-confirm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 5 to macro-dial-confirm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 6 to macro-dial-confirm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 7 to macro-dial-confirm
Aug 14 16:43:38 DEBUG[3592]: pbx.c:4864 ast_add_extension2: Added extension 's' priority 8 to macro-dial-confirm
Aug 14 16:43:38 DEB