Celliax.Org

Hi,

just tried new instruction from 'How to install Celliax in Trixbox 2.2.x'

everyting goes fine. trixbox boots fine. asterisk starts ok. then I add Custom Trunk as described in 'How to install Celliax with FreePBX in Opensuse'. file /etc/asterisk/celliax.conf is changed to sute my config (nokia 8210 with audio adapter and com port datacable - fbus2, 115200bps, com1). I even can see celliax trunk in Trixbox/FreePBX web interface 'Setup - Trunks'. during boot I can see the following messages:

Manager recieved command 'Command'
chan_celliax - do_monitor - Syncing serial
chan_celliax - serial_list_acknowledge_fbus2 - debug_fbus2 - postfree outgoing list
chan_celliax - serial_read_fbus2 - debug_fbus2 - fbus2 phone model is nsm-3 inseqnum 44

till now everything looks fine... I also created sip extention '200'. so I call from softphone to asterisk expecting celliax to terminate my call in gsm network. I wanted to see call progress so I opened Trixbox/FreePBX web interface 'Panel', but there is no celliax trunk in it. right after number dialed - asterisk stops responding - no ssh connection, no web interface... I can only ping my linux box.

On the screen connected directly to my linux box I can see the following messages:
Sep 26 20:24:21 error [2802]: chan_celliax.c:5822 serial_init: [b7dddbb0][error 5822][nicephone][3,3,3,0] serial error: input/output error
Sep 26 20:24:21 debug [2802]: chan_celliax.c:3536 do_monitor: [b7dddbb0][debug_serial 3536][nicephone][3,3,3,0] serial init failed

Can someone help me? Thanks....